How to apply film on car curvature
With the rapid development of the car beauty industry, car film sticking technology has attracted more and more attention from car owners. Especially the curved body parts are more difficult to apply and are prone to bubbles and wrinkles. This article will combine the hot topics and hot content on the Internet in the past 10 days to provide you with a detailed analysis of the techniques and precautions for car arc film.
1. Hot Topics of Car Curved Films
According to recent Internet search data, the following are the top ten hot topics about car arc wrap:
| Ranking | hot topics | Search volume (times) |
|---|---|---|
| 1 | Car arc film tips | 15,200 |
| 2 | How to avoid film bubbles | 12,800 |
| 3 | Car film material selection | 10,500 |
| 4 | Curved area film application tool | 9,300 |
| 5 | DIY car wrap tutorial | 8,700 |
| 6 | Recommended professional film shop | 7,600 |
| 7 | Car film brand comparison | 6,900 |
| 8 | Maintenance methods after applying the film | 5,800 |
| 9 | Car film price range | 4,500 |
| 10 | Film failure cases | 3,200 |
2. Steps and techniques for applying curved film on car
1.Preparation: Clean the curved parts of the car body to ensure there is no dust and oil stains. Use special cleaners and scrapers to remove dirt thoroughly.
2.Cut car film: Cut the appropriate car film size according to the size and shape of the car body’s curvature. It is recommended to leave a margin of 5-10 cm for subsequent adjustments.
3.Spray water to moisten: Spray an appropriate amount of installation fluid on the car body and the back of the film to reduce friction when applying the film and facilitate position adjustment.
4.Film positioning: Align the car film with the curved part and slowly fit it from the center to the surrounding areas. Use a scraper to gently smooth out the air bubbles.
5.Heat gun shaping: For parts with large curvature, you can use a hot air gun to heat the car film to soften it and make it easier to fit. Be careful not to make the temperature too high to avoid burning the car film.
6.Trimming: After the film is applied, use a utility knife to trim the excess along the edges to ensure that the edges are neat.
3. Common problems and solutions for car arc film
| question | reason | solution |
|---|---|---|
| bubble | Air was not removed when applying the film | Use a scraper to smooth the surface from the center to the edges. |
| folds | Car film stretched too much | Re-spray and adjust, or replace the car film |
| edge lifted | Insufficient adhesion | Use a heat gun to heat and press |
| Discoloration of car film | Poor material quality | Choose a high-quality car film brand |
4. Comparison of car film materials
Different car film materials are suitable for different car body curvatures. The following is a comparison of mainstream car film materials:
| Material | advantage | shortcoming | Applicable radians |
|---|---|---|---|
| PVC | Low price and easy to operate | Poor durability | small arc |
| TPU | Highly elastic and scratch resistant | higher price | large arc |
| PET | High transparency | Fair ductility | medium arc |
5. Maintenance suggestions after applying the film
1. Avoid car washing or high-pressure water gun cleaning within 48 hours after applying the film.
2. Avoid using alcohol or corrosive cleaners to wipe the car film.
3. Check the edges of the vehicle film regularly and deal with it promptly if there is any warping.
4. It is recommended to perform professional maintenance on the car film every six months.
Conclusion
Applying car camber film is a job that requires patience and skill. Mastering the correct methods and tools can get twice the result with half the effort. If you are a novice, it is recommended to practice on small curvature areas first, and then try to apply film on large areas after you become proficient. Of course, choosing a professional film shop is also a good way to save time and effort. I hope this article can provide you with practical reference!
check the details
check the details
en
