• Model NO.：O-H112 ISO Certificated
• Alloying Ingredient：6083
• Certification：CE, SONCAP, ISO, CIQ, RoHS, TUV
• Polished Aluminum Profile：Mechanical Polishing
• Transport Package：Standard Polish
• Specification：0.2-150mm thickness, 500-2800mm width
• Trademark：Bozhong
• Origin：China
• HS Code：760612200
• Production Capacity：50000tons,Years

Basic Info.

Model NO. O-H112 ISO Certificated Alloying Ingredient 6083 Certification CE, SONCAP, ISO, CIQ, RoHS, TUV Polished Aluminum Profile Mechanical Polishing Transport Package Standard Polish Specification 0.2-150mm thickness, 500-2800mm width Trademark Bozhong Origin China HS Code 760612200 Production Capacity 50000tons/Years

Product Description

ISO Certificated 6083 Aluminum Alloy Plate O-H112 for Export

 

product description:
A)Product introduction:ISO Certificated 6083 Aluminum Alloy Plate O-H112 for Export
Aluminum plate refers to a rectangular plate formed by rolling an aluminum ingot. It is divided into pure aluminum plate, alloy aluminum plate, thin aluminum plate, medium-thick aluminum plate, and patterned aluminum plate.

Aluminum plate refers to the aluminum material with a thickness of more than 0.2mm to less than 500mm, a width of more than 200mm, and a length of less than 16m, called aluminum sheet or aluminum sheet, less than 0.2mm is aluminum, and less than 200mm is a row or strip (of course With the advancement of large equipment, there are more aluminum plates that can be as wide as 600mm).
 

B)Aluminum plate classification:
1. According to alloy composition:
High-purity aluminum sheet (rolled from high-purity aluminum with a content of more than 99.9)
Pure aluminum plate (The composition is basically rolled from pure aluminum)
Aluminum alloy plate (composed of aluminum and auxiliary alloys, usually aluminum copper, aluminum manganese, aluminum silicon, aluminum magnesium, etc.)
Composite aluminum plate or brazed plate (a special purpose aluminum plate material is obtained by means of multiple materials composite)
Aluminum clad aluminum plate (aluminum plate covered with thin aluminum plate for special purpose)
2. Divided by thickness: (unit mm)
Aluminum sheet (0.15-2.0)
Conventional sheet (aluminum sheet) 2.0-6.0
Medium plate (aluminum plate) 6.0-25.0
Thick plate (aluminum plate) 25-200

C)application
1. Lighting 2. Solar reflector 3. Building appearance 4. Interior decoration: ceiling, wall, etc. 5. Furniture, cabinet 6, elevator 7, signage, aluminum plate, luggage 8, car interior and exterior decoration 9. Interior decoration : Such as photo frame 10, household appliances: refrigerator, microwave oven, audio equipment, etc. 11. Aerospace and military aspects, such as China's large aircraft manufacturing, Shenzhou spaceship series, satellites and other aspects. 12. Mechanical parts processing 13. Mold manufacturing 14. Chemical / insulation pipe coating. 15. High quality ship plate

D)Chemical composition and properties
Aluminum Al: balance; silicon: Si: 0.25; copper Cu: 0.10; magnesium Mg: 2.2 ~ 2.8; zinc Zn: 0.10; manganese Mn: 0.10; chromium Cr: 0.15 ~ 0.35; iron Fe: 0.40.
Tensile strength (σb): 170 ~ 305MPa
Conditional yield strength σ0.2 (MPa) ≥ 65
Elastic modulus (E): 69.3 ~ 70.7Gpa
The annealing temperature is: 345 ºC.

E)Care and maintenance
The specific cleaning steps of the aluminum plate are as follows:
1. First rinse the surface of the board with plenty of water;
2. Use a soft cloth soaked with detergent diluted in water to gently wipe the surface of the test board;
3. Rinse the surface of the board with plenty of fresh water to wash away the dirt;
4. Check the surface of the board, and focus on cleaning the places that are not cleaned with detergent;
5. Rinse the board surface with clean water until all the detergent is washed away.
Note: Do not clean the hot board surface (when the temperature exceeds 40 ° C), because the excessive evaporation of water is harmful to the board surface paint!
In particular, please choose the appropriate detergent. A basic principle is: you must choose a neutral detergent! Please do not use strong alkaline detergents such as potassium hydroxide, sodium hydroxide or sodium carbonate, strong acid washing Agents, abrasive detergents and baking detergents.

F)Packaging & Delivery

Packaging Details: packed in seaworthy pallet or wooden pallets accrding customs' requirement.
Delivery Detail: 25 working days after 30% T/T payment received

G)our company

H)Contact Now

Shanghai Bozhong Metal Group Co., Ltd.
ADD: Floor 5, Building 32, No.288 Xinzhuan Highway, Songjiang District, Shanghai, China 
Contact: Alicia Liu
 
 
Website: https://shanghaibozhong.en.made-in-china.com